Job Duties:

• Answering and directing calls.
• Scheduling appointments.
• Entering patient data into CRM software.
• Collecting and posting payments.
• Assisting with other administrative duties.
• 
  

Job Duties:

• Work closely with dispatch, maintenance, and plant management to facilitate the flow of information required to provide good customer service
• Receive delivery ticket and follow instructions as directed
• Position truck under the batch plant to be loaded by the Batch Plant Operator/Plant Manager
• Operate truck to receive a load and evaluate slumps
• Maneuver truck on job site including attaching chutes to discharge material
• Complete all forms, reports, tickets, and required paperwork.
• Perform thorough pre-trip and post-trip inspections; document and report vehicle condition at beginning and end of each shift
• Check all vehicle fluid levels daily and add fluids if necessary
• Clean the outside of the vehicle and chutes to ensure the absence of concrete build-up at the end of each shift
• May assist mechanics in vehicle repair and change tires as necessary
• Maintain daily reports as required by DOT and Company regulations
• Prioritize safety throughout the operation in accordance with MSHA and Vulcan standards.
• Operates ready-mix truck in accordance with all federal, state, and Vulcan regulations.
• May be required to operate front end loader to feed ready mix plant and move material as needed
• Assist in maintenance and upkeep of yard, plant, and office

Job Requirements:

• Must have sufficient level of education to understand oral and written instructions of a technical nature relating to products and vehicles
• Must have excellent driving skills and the ability to maintain satisfactory customer and public relations in the performance of duties
• Knowledge of general principles and practices of operating and servicing ready-mix trucks is preferred
• Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises
• Must be able to speak, read, and have a working knowledge of the English language
• Perform physical activities such as climbing a ladder to inspect loads of ready mix concrete, hanging mixer chutes, and lifting up to 50 pounds.
• Experience with Department of Transportation rules and regulations is preferred

Job Duties:

• Safely operate a Bobtail truck to transport hazardous materials in compliance with all DOT and company regulations.
  • Load and unload materials using a pallet jack and forklift as needed.
  • Ensure all loads are properly secured and documentation is accurate.
  • Inspect vehicle daily and report any maintenance or safety issues.
  • Maintain a clean driving record and adhere to all safety and regulatory standards.
  • Communicate effectively with dispatch and customers as required.
• Requirements
  • Valid CDL license with Hazmat endorsement.
  • Ability to lift 50–100 lbs repeatedly throughout the day.
  • Experience operating a pallet jack and forklift.
  • Strong understanding of safety regulations for handling hazardous materials.
  • Excellent communication and time-management skills.
  • Reliable, punctual, and professional demeanor.

Job Duties:

• Can set up, run, inspect a job on a manual and CNC mill and lathe
• Can understand and program G&M code
• Can read and understand GD&T
• Can use inspection tools to fully inspect parts
• Can troubleshoot common machining issues (feeds, speeds, work holding, etc.)
• Maintains a clean and organized work area
• Respectful of other employees working before or after him
• Pay will be based on experience, skill, and work ethic

Job Requirements:

• Machining: 5 years (Required)
• Owns their own machinist tools

Job Duties:

• Install, inspect, maintain, and repair HVAC systems including furnaces, air conditioners, heat pumps, boilers, ductwork, and refrigeration systems
• Diagnose mechanical and electrical issues using appropriate testing equipment
• Perform preventative maintenance to ensure optimal system performance and energy efficiency
• Read and interpret blueprints, wiring diagrams, schematics, and technical manuals
• Ensure all work complies with local, state, and federal codes and safety regulations
• Handle refrigerants responsibly in compliance with EPA standards
• Provide excellent customer service and explain system issues and solutions clearly to clients
• Accurately complete service reports, work orders, and maintenance logs
• Maintain tools, equipment, and service vehicle in safe working condition

Job Requirements:

• HVAC/R Certification from an accredited technical school or apprenticeship program
• State HVAC License
• OSHA 10 or OSHA 30 Certification
• Strong understanding of electrical systems, controls, refrigeration cycles, and airflow principles
• Ability to use diagnostic tools, gauges, meters, and hand/power tools
• Physically able to lift up to 50 lbs, work in confined spaces, and climb ladders
• Strong problem-solving and troubleshooting skills
• Reliable, punctual, and able to work independently or as part of a team

• Maintain dimensional quality on all parts by repeated inspection throughout the machining process
• Read and interpret blueprints
• Use basic measuring instruments such as: micrometers, calipers, and dial indicators
• Perform pre and final machining on parts in accordance with written and verbal instructions
• Set up and operate one or more of the following: lathes, mills, grinders, and other machinery, manual or CNC, as required.
• Perform preventative maintenance on equipment
• Ensure all environment, health, and safety rules, requirements, and procedures are adhered to
• Maintain work area in a clean and orderly manner
• Perform other duties as required
• Verify that all instruments used have been calibrated
  
  

Job Requirements:

• Reading blueprints
• Ability to read and use basic measuring instruments
• Machining processes & CNC controls

• Implement and administer a preventative maintenance program for all equipment. 
• Ensure that PM activity is completed on or ahead of schedule.  
• Support the effective operation of the plant from the standpoint of equipment availability, financial objectives, product output objectives, quality requirements, and all other production activities necessary to meet daily customer requirements are met.
• Ensure effective and timely resolution of for all un-planned maintenance activity to ensure minimal downtime. Support production schedules, from a maintenance perspective, to achieve site objectives, including but not limited to TAT, OTC, scrap, COPQ, and financial objectives.  
• As a supervisor, you are a change agent. Using CORE, Lean, Flow, Kaizens, Muda reduction, and continuous improvement, etc. drive progressively effective levels of execution within the areas under your responsibility. 
• Responsible for ensuring compliance by all reporting personnel to policies, procedures and quality requirements of this facility. 
• Responsible for integrating equipment support and PM activities between shifts and the various manufacturing areas.  
• Responsible for identifying and fulfilling training needs of reporting personnel. Through management of Preventative Maintenance Programs and proper prioritization of un-planned maintenance interventions, support all efforts to achieve plant measurement goals, including TAT, OTC, and minimal past due parts.  
• Responsible for tracking time, vacation and attendance for reporting personnel. Approval of all employee time in company systems. Ensure employee development through directed training, performance feedback and career counseling. 
• Responsible for the completion of other tasks or projects as they are assigned by your manager. 
• Ensure full compliance with the company work rules, safe work practices and procedures established to protect the environment, take immediate action upon and report all unsafe acts, hazardous conditions, and conditions which impact or have the potential to impact the environment. 
• Ensure that all audits & tasks for Safety, Environmental, and Health are completed on or ahead of schedule. Take prompt action to resolve any issues noted.

Job Requirements:

• Bachelor’s Degree and 2+ years’ experience in Equipment Maintenance, Manufacturing, and/or an Aftermarket Aviation environment.
• 4+ years prior experience in an equipment maintenance role. 
• 2+ years prior experience supervising a small to mid-sized team
• Working knowledge to interpret and implement engineering instructions and FAA requirements.   

Job Duties:

• Can run, inspect a job on a manual and CNC mill and lathe
• Can understand and program G&M code
• Can read and understand GD&T
• Can use inspection tools to check parts
• Can troubleshoot common machining issues (feeds, speeds, work holding, etc.)
• Maintains a clean and organized work area
• Respectful of other employees working before or after him
• Pay will be based on experience, skill, and work ethic

Job Requirements:

• Machining: 2 years (Required)
• Owns their own machinist tools

Job Duties:

• Install, repair, and maintain plumbing systems including water, gas, drainage, and sewer lines
• Diagnose plumbing issues such as leaks, clogs, low pressure, and system failures
• Install and service fixtures, faucets, toilets, water heaters (tank and tankless), sump pumps, and backflow systems
• Read and interpret blueprints, schematics, and building plans
• Ensure all work complies with local, state, and federal plumbing codes
• Perform inspections and pressure testing as required
• Communicate clearly with customers regarding repairs, timelines, and costs
• Complete service reports, work orders, and documentation accurately
• Maintain tools, equipment, and job sites in a safe and clean condition

Job Requirements:

• Current Journeyman or Master Plumber License (state-issued and in good standing) 
• Strong knowledge of plumbing systems, materials, and installation methods
• Proficient in using hand tools, power tools, and diagnostic equipment
• Ability to troubleshoot and resolve plumbing issues efficiently
• Physical ability to lift up to 50 lbs, work in confined spaces, and stand for extended periods
• Strong attention to detail and commitment to safety